Greenhold – Pebble Foot – Set of 20
Premium Birch Ply Foot-holds in graduated sizes to cater for everyone
From a tiny edge up to a comfy pebble – one to suit all your family
Description
We’ve designed these footholds to put you in control of your wall and allow a wide range of difficulty without the need for complexity.
Climbing the same problem or circuit on a smaller foothold can be as good as an angle changing wall, at a fraction of the cost.
We’ve designed these holds with different profiles top and bottom, so each foothold offers two different levels of positivity, simply by spinning it upside down.
They are available in four different thicknesses that cater for everything from the cruiser to the crusher.
Our recommendation is to run a combination of something you find easy, and something fairly hard. Take a look at our full board sets for ideas, or as a good starting point go for 10 & 22mm at 25 degrees, or 16 & 28mm at 40 degrees.
We recommend using 50% of the bolt holes in the lower half of your board, plus all the holes on the kickboard.
On our Ground-Up walls that requires 40 on a narrow (1.2m), for a midi (1.8m) its 60, or on a wide (2.4m) 80.
Our bundles include these quantities, otherwise they are available in sets of 20.
The natural birch plywood finish develops a polish fairly quickly, which especially on the smaller sizes calls for some super precise footwork.
Features
o Sustainable FSC Certified Premium Exterior Birch Plywood
o M10 Bolts and anti-rotation wood screws included
o Steel fixing inserts for durability
o Hand Holds requires 8mm Hex Hey and PZ2 Driver for setting
o Footholds require 6mm Hex Hey for setting
o Shaped by climbers & machine in the UK
Description
We’ve designed these footholds to put you in control of your wall and allow a wide range of difficulty without the need for complexity.
Climbing the same problem or circuit on a smaller foothold can be as good as an angle changing wall, at a fraction of the cost.
We’ve designed these holds with different profiles top and bottom, so each foothold offers two different levels of positivity, simply by spinning it upside down.
They are available in four different thicknesses that cater for everything from the cruiser to the crusher.
Our recommendation is to run a combination of something you find easy, and something fairly hard. Take a look at our full board sets for ideas, or as a good starting point go for 10 & 22mm at 25 degrees, or 16 & 28mm at 40 degrees.
We recommend using 50% of the bolt holes in the lower half of your board, plus all the holes on the kickboard.
On our Ground-Up walls that requires 40 on a narrow (1.2m), for a midi (1.8m) its 60, or on a wide (2.4m) 80.
Our bundles include these quantities, otherwise they are available in sets of 20.
The natural birch plywood finish develops a polish fairly quickly, which especially on the smaller sizes calls for some super precise footwork.
Features
o Sustainable FSC Certified Premium Exterior Birch Plywood
o M10 Bolts and anti-rotation wood screws included
o Steel fixing inserts for durability
o Hand Holds requires 8mm Hex Hey and PZ2 Driver for setting
o Footholds require 6mm Hex Hey for setting
o Shaped by climbers & machine in the UK
You may also like…
Wide 40° Ground-Up Wall System
From: £2,395 inc VAT
Greenhold - Roots Set
£545 inc VAT